Setup

“With VEGA technology, any user can set up his measuring point exactly as the system requires. Remote parameter adjustment via a control system is just as easy and flexible as setup on site.”

Both DTM and EDD are available for remote parameter adjustment of VEGADIF. Fast and reliable setup is ensured through the simple selection of the application in the adjustment software. Setup can also be carried out with the help of the indicating and adjustment module PLICSCOM or with a HART handheld 375. If the measurement point is not easily accessible, an external electronics or the indicating and adjustment unit VEGADIS 61 can be used.

The indicating and adjustment module PLICSCOM is used for measured value indication, adjustment and diagnosis directly on the sensor. Its menu structure is clearly arranged and makes setup simple. Status messages are displayed in plain, readable text. In addition, all instrument data like measuring range, process fitting and seal material can be read out.

The external indicating and adjustment unit VEGADIS 61 with integrated PLICSCOM can be connected to the sensor via standard cable up to 50 metres long. It allows setup of the measuring point even in difficult to access locations and requires no external power.

Versatility allows flexible working: the mobile VEGACONNECT easily connects communicationcapable VEGA instruments to any PC via the USB interface. The parameter adjustment of these instruments is carried out via the well-proven adjustment software PACTware with DTM. VEGACONNECT can also be used as a universal HART modem for sensors of other manufacturers.

The HART handheld 375 also enables on-site sensor parameter adjustment. To be able to access the HART parameters of a sensor, it must be connected to the sensor cable via a minimum working resistance of 220 ohms.