corporate

Change country

   
Imprint Search Sitemap Contact
Home » plics » The technology » Indication
Indication
Adjustment
Housing
Approvals
Electronic
Process fitting
Sensor type

Indication


PLICSCOM
  • One module for all VEGA instruments
  • Measured value with unit 
  • Mountable in 90° increments
  • Easy adjustment via 4 keys
  • Echo and trend curve on the display
  • Data memory in PLICSCOM
  • Splash-proof also with opened housing cover

PLICSCOM offers considerably more possibilities than previous adjustment modules.

By using a dot matrix, it presents graphic elements as well as echo and trend curves on the display. Of course, the selection and presentation of a number of units is also possible.
Backup of the adjustment values will be possible with the aid of a memory in PLICSCOM. When you have the same vessel dimensions it is possible to copy the data from one sensor to another. This saves time and reduces adjustment errors. Even a defective sensor is quickly available again by downloading the data from PLICSCOM.
Due to the splash-proof mounting of PLICSCOM, the adjustment under bad weather conditions is no problem. The electronics and terminal compartment always remain dry.




PLICSCOM mounted 		Mounted in VEGADIS 61

External display and adjustment unit.
Suitable for external display of measured values and adjustment of the sensors.
- digital and quasi-analogue display of measured values
- can be mounted up to 25m away from the sensor

PLICSCOM can be mounted or dismounted at any time. The power supply must not be interrupted.
  1. Unscrew the housing cover
  2. Place PLICSCOM in the requested position on the electronics.
Four different positions with 90° displacement can be selected.